NETGEAR AC4000 Nighthawk X6S R8000P router login review
Using Multi-User MIMO technology, NETGEAR routers can stream data to multiple devices simultaneously. With MU-MIMO, your WiFi network can deliver faster throughput to every MU-MIMO connected device. That means faster downloads and smoother streaming for your devices.
How to log in the router NETGEAR AC4000 Nighthawk X6S R8000P?
1.Connect your NETGEAR AC4000 Nighthawk X6S router to your network.
2.Power on your NETGEAR AC4000 Nighthawk X6S router and wait for the lights to become stable.
3.Open an internet browser such as Safari, Internet Explorer, Mozilla Firefox or Google Chrome.
4.Go to the address bar and type http://www.routerlogin.com/ or http://www.routerlogin.net/. If you can not open this website, try 192.168.1.1 or 192.168.0.1 or 10.0.0.1.
Username: admin Password: password
5.Wait for NETGEAR genie to finish detecting whether there is an existing router in the network.
6.Select “Let Me Choose”, then Access Point Mode. Click “Next” to proceed.
7.Choose the setting that applies for the next step (disabling your existing gateway’s WiFi):Select “Yes” if you can disable your existing gateway’s Wi-Fi. Enter your existing gateway SSID and passphrase in the SSID and passphrase fields. You will then need to manually disable your existing gateway’s Wi-Fi. For instructions on doing this, refer to your gateway’s user manual.
Select “No” if you cannot disable your existing gateway’s Wi-Fi.
8.Wait for the router to finish rebooting.
9.Click “Next” to finish the setup.
If you forget the password please reset the router to factory default by pressing the reset button/hole on the router.
Reset the router by inserting a small pin or paperclip into the reset hole of the router for about 10 seconds or until the power LED blinks once.
Default router password list
The Nighthawk X6S AC4000 Router, with breakthrough Tri-band WiFi and multi-user MIMO (MU-MIMO) is ideal for simultaneous streaming to many WiFi devices in your home. The X6S offers the fastest combined WiFi speed up to 4Gbps, and is powered by a powerful 64-bit, dual core 1.8GHz processor with three offload processors.
Enjoy fastest WiFi speed throughout your home with less lag and less buffering as you game, stream and surf. Access and control your router from anywhere using features such as NETGEAR genie® remote access, ReadyCLOUD and OpenVPN. Control your home network with voice commands using Amazon Echo/Alexa.
I just purchased a R8000P router to replace my aging WNDR4500(v1) butam finding that in the master bedroom, even though signal strength is still showing as full strength, i am getting really low data speeds. especially on the 5Ghz bands. last time i checked, I was only getting 0.04MBps. this is far lower than what i was getting from my old router on the 5Ghz network.
My son have tried reflashing and reseting to factory, as well as just reseting to factory. for a while speeds were good, but the degraded over time. the 5Ghz band is almost empty, with only one other network besides the two signals coming from the router. I am unsure as to why this slowdown is ocuring. All other locations in the house seem to be getting good speeds from the router.