Detailed Analysis of D-Link DIR-882 Router

More users just need to lay equal stress on performance and stability, and use products that are relatively simple, but function and playability are secondary. Such products are the real mainstream in the market. For example, today’s D-Link DIR-882 is such a positioning router. Interested friends should not miss it.

As we all know, routers with strong performance, rich functions, high playability and high stability are ideal for players, but such routers are generally expensive, and not all users are players. More users just need to lay equal stress on performance and stability, and use products that are relatively simple, but function and playability are secondary. Such products are the real mainstream in the market. For example, today’s D-Link DIR-882 is such a positioning router. Let’s take a look at it.

Products More Suitable for Users’Choice

D-Link DIR-882 router belongs to 802.11ac Wave 2 grade product, 2.4 GHz and 5 GHz dual-band design, supports 160MHz bandwidth and 4×4 MU-MIMO technology, theoretical bandwidth is 800Mbps + 1733 Mbps, belongs to AC2600 grade router, the current market price is 799 yuan.

D-Link DIR-882 router is based on MT7621AT processor, a dual-core processor with a main frequency of 880MHz, which belongs to the mid-end product in the router field; memory is DR3 from South Asia with a capacity of 128MB; flash memory capacity is relatively small, only 16MB; 2.4GHz band and 5GHz band are entered through MT7615N. Line expansion, each band has a chip.

From this configuration, D-Link DIR-882 router can only be regarded as the mid-end level in AC2600 level products, and its playability is not high. It is not suitable for “hard core players” in router field, but it is enough for daily home environment and even for game enthusiasts.

In the post-I/O interface part, the DIR-882 router provides four Gigabit LAN interfaces and one Gigabit WAN interface. The power input has a separate switch. It also provides a USB 2.0 interface for peripheral device expansion.

The router is equipped with four 5dBi gain antennas. The antenna is non-removable and has a range of 180 degrees. The front end of the router also has a USB 3.0 interface. There are a lot of heat sink holes on the bottom of the router, as well as holes for wall hanging.

Attached is a gigabit network cable and a power adapter, the specifications of which are DC12V 2.5A.

What is the use of router memory?

What is the use of router memory? The larger the memory of router, the better?

Our small and medium router, it also has processor, memory, storage and other hardware, equivalent to a micro-computer. So, what’s the use of router memory? When buying a router, do you choose a product with large memory or small memory?

As we all know, when it comes to “memory”, we usually think of computer memory, mobile phone running memory and so on. In fact, many devices have memory, such as small and medium routers in our home. In fact, it also has processor, memory, storage and other hardware, which is equivalent to a micro-computer. So, what’s the use of router memory? When buying a router, you should choose a product with large memory or small memory. Interested friends should not miss it.

Will the larger the memory of the router, the better?

Whether it’s PC or mobile phone, the larger the memory, the smoother the device is, so the bigger the better. In routers, the same is true, of course, the larger the memory, the better.

What’s the use of router memory?

For routers, the larger the memory, the larger the data cache space, and the more difficult it is to block large amounts of data.

Because most router devices are long-term, they will not shut down or restart for several weeks, a month or even a year or two. For a long time, they will occupy more and more memory space, and are prone to congestion, which will lead to slow and unstable network connection. Generally, restart routers to release memory can be obtained. To solve.

If the memory of the router is large enough, this means that it is not easy or possible for this kind of data jam to occur for a longer time. On the other hand, with the advent of the era of smart home, the demand for networking of household appliances is increasing. Large memory routers can provide stable connection escort for more devices, and the whole family can share freely online, while ensuring the smooth operation of more plug-ins.

If the memory of router is relatively small, if there are more connecting devices, there may be insufficient memory, resulting in various network jamming, slow connection and other problems.

Therefore, router memory is also an important parameter, which determines the router’s multi-device connectivity, data cache processing and so on. At present, most of the common routers have 64GB memory, and the better ones are 128GB, 256GB or higher. For consumers, if there are fewer devices connected at home, such as less than 10, ordinary routers are also adequate. If there are multiple device users or large light data, it is recommended to choose routers with larger memory as far as possible, the stability will be better.

What if the management page of the TP-Link router cannot be opened?

I want to reset the WiFi password, but I can’t go to the management page of the tplink router, and I can’t set it. Today, Xiaobian has found a solution on the internet. Let’s take a look at it.

The current TP-Link router, the management page address is: tplogin. cn; in the correct case, in the browser of the computer, mobile phone input: tplogin. cn, you can open the management page.

If you can’t open the management page of the tplink router when you operate, in most cases, you have problems with your own operation, in very few cases, it is caused by the problems of the tplink router itself.

solution

If the connection between TP-Link router, computer and cat (broadband network line) is not correct, the management page will not open. The correct connection modes of TP-Link router, computer and modem are as follows:

The WAN interface on the TP-Link router needs to be connected with the cat’s network/LAN port (broadband network line in the home). The computer can be connected to any one of the network interfaces in 1, 2, 3, 4.

Tips:If it is set by mobile phone, the mobile phone must be connected to the WiFi signal of the TP-Link router. If the mobile phone connects to other WiFi signals, or uses data traffic to access the Internet, it must be unable to open the management page of the TP-Link router.

Many novice users carelessly enter the address of the management page in the browser when they operate, which results in the inability to open the management page of the tplink router.

Please note that the address of the management page of TP-Link router is tplogin.cn. When you type in the browser, make sure that you type in this place, and suggest that you check it carefully once the input is completed.

Another error-prone place is that when tplogin. cn is entered into the browser, the location of the input in the browser is incorrect, resulting in the tplink management page can not be opened.

Whether it’s a computer operation or a mobile phone operation, when you enter tplogin. CN in the browser, you need to input the address in the browser to open the tplink management page.

When setting up with a computer, it’s better to set the IP address of the computer to be automatically obtained, as shown in the following figure. If you don’t know the IP address of your computer, you can read the following article and check/set the IP of your computer according to the method in this article.

Supplementary content

I. Windows XP Dynamic IP Settings

1. Right-click “Online Neighbor” Click Properties
2. Right-click Local Connection – > Click Properties
3. Double-click “Internet Protocol (TCP/IP)”
4. Select “Get IP Address Automatically” and “Get DNS Server Address Automatically” and click “OK”.

II. Windows 7 Dynamic IP Settings

1. Right-click “Network” to select “Properties”.
2. Click “Change the adapter settings”
3. Right-click the Local Connection Selection property
4. Select “Internet Protocol Version 4 (TCP/IPv4)” and click “Properties”.
5. Select “Get IP Address Automatically” and “Get DNS Server Address Automatically”, and click “OK”.

III. Windows 8 Dynamic IP Settings

1. Mouse slides the lower right corner of the desktop. The following interface appears, and then click the “Settings” option.
2. In setting up the interface, click the “Control Panel” option
3. Choose the “Network and Internet” option
4. Click on “Network and Sharing Center”
5. Click “Change the adapter settings”
6. Right-click “Ethernet” to select “Properties”
7. Select “Internet Protocol Version 4 (TCP/IPv4)” and click “Properties” (or double-click “Internet Protocol Version 4 (TCP/IPv4)”.
8. Select “Get IP Address Automatically” and “Get DNS Server Address Automatically” and click “OK”

Finally, if all the above methods are tried, the tplink router management page will not be opened. So, it is recommended to restore your TP-Link router to the factory settings, and then try again to access the management page?

What Is My IP Address

This is a tool for querying the IP address. You can see your own IP address and location on the map. It’s interesting. In addition, this article will introduce how to check the internal IP address step by step. It is written for non – advanced users.

How do I find my internal IP address?

When you hear the news about the internal IP address, what do you think? This is the only combination of numbers, which is routers to each device in the LAN. The only internal IP address guarantees that the transmitted data will be passed to the correct device.

There are many different ways to find out the internal IP addresses used in your personal computer, so this article will be sorted in the method of using the Windows command prompt. If you are searching for some different ways to solve your “IP address” problem, you can check other articles on our website. Well, let’s go on looking for a solution. Please follow all the following steps:

1.First, you need to open the start menu by clicking the start icon. If you do well, there should be a similar screenshot here.

2.Then, you need to enter CMD in the dialog box. You need to find cmd.exe at the top of the menu list.

3.It will be a black window. It is necessary to enter “ipconfig” here, and then press the Enter key.

4.There should be a IP address list now, like the screenshot below.

5.You need to find the IPv4 line. This is your internal IP address. The screenshot example shows my own internal IP address. For example, my IP address is 192.168.100.4, but someone can be 172.16.0.1.

You can also find the same line as the router’s IP address here. The router is the default gateway for Windows. Most routers use 192.168.1.1 and 192.168.0.1 internal IP addresses. The personal computer address has three identical parts, but the last part is different.

If this article can help you answer your questions, we are very happy. If you are searching for some IT information, you can look at other articles.