IP address is the management ip address of some wireless router,it is the default ip address for all kinds of TP-link,D-Link and Netgear models. But you can change it at any time using the network router’s management console. is a private IPv4 network address. Home routers can use it to create a default gateway. In such a router, you can access it to the management console, pointing to the through the Web browser.

Any brand of router, or any computer on the local network for this problem, you can use this address or similar private IPv4 address. Any IP address, only one device on the network uses to avoid address conflicts.

We often go to the Ping when debugging the router. How is the Ping through the
Reply from : bytes=32 time .

When you return the results of the above data, it indicates that the computer is connected to the router is correct, you can ping router.

So it is necessary to pay attention to is: because the network speed is very fast, time is generally display

A net friend to me of feedback, the new connection to the wireless router,Internet lights are not bright, but it can be normal to the Internet, but can not open, is how to return a responsibility?
I bit curious and open configuration of the router interface is how to make the router normal Internet access, Murphy is installed broadband get help?

In fact, the IP address of the router is not necessarily, and a significant portion of the router’s IP address to see the back of the router tabs, is what address access router.

Since it can be normal online, you need to consider other reasons, such as: IP did not get, the network did not plug, DNS error, etc..

Now the vast majority of brand or brands wired or wireless router, the LAN port address general use or segment.

Using the default address, neither safe, sometimes it’s not practical, such as LAN computer number is too high, more than 255 sets, the class C address is not suitable for, then we need to the LAN port of the router address modification for other private network address, below the author on this issue, teach you how to modify the IP address of the router LAN port.

1, the computer IP address set for automatic acquisition.
2, open the IE browser, in the address bar to enter or, the user name and password in the pop-up box and enter the default value, that is, admin/admin.
3, enter the router settings interface, click on the left menu bar network parameters LAN port settings.
4, on the right side of the LAN interface, the IP address to the desired address segment, such as, subnet mask
5, after the completion of the modification, click save, and generally this time the router is prompted to restart, click Yes.
6, the above five steps just for the router settings, if at this time want to log in to the router web interface, use is can not be landed. Instead, we should use the local computer’s IP address section is arranged for before they can.

A friend bought a new laptop and wireless internet access for laptop to access the router. In the browser input router is not open, specific performance for access router IP (usually http: / / or) but not open the page, which in the end is what reason?
Understand what is.

IP (Class A), (class B), (Class C) is a network reservation address. Therefore ip192.168.1.1 is a network address reservation, most brand router settings page of the default address (IP And other address, but basic all is router 192.168.*.* such address).

The correct access method is input: or (HTTP can be omitted, that is, the direct input of or can be). Note that different brands of routers, the default IP access address is not the same, but also allows the user to modify the default address. So please refer to the instruction manual for the specific address. Also must add that a point is usually the default port is 80, so access to omit the address the port (full address is 80 http: / /, if you modify the port value, you need to complete the writing, such as If the address is not a mistake, but still encounter can not open how to do it? Check Ping is normal when not enter, performance for IE input cannot display the webpage, it may be a network connection problems, we can use Ping check: click the windows start button, in order to choose “programs > Accessories > command prompt, type” Ping “(note the Ping behind a space in the open a command prompt window, direct written ping192.168.1.1 will be unable to get correct results). If the results indicate that similar to the one below, said Ping impassability, unable to explain from your computer access to the router.

Usually the following situation will lead to the failure of the Ping: the router does not pass. For example, the power adapter is not connected to the power, the router switch is not open, etc.. After the power of the router`s lights will shine. Network cable connection between the computer and the network problems, such as the loss of crystal head, cable breakage, loss of network card will result in not connected, of course, will not be able to log in. Change the cable or in another computer to access the router, if you can open the network cable or network card problems. The firewall has banned access to the router IP192.168.1.1. According to the different firewall software set up method, the lifting of the ban. Network settings are incorrect. For example, the machine`s IP address, subnet mask, gateway and other settings can not connect to the router. Refer to the router`s manual or check the settings below.

If there is no problem with the Ping, but can not log on how to do it? At this time to see if the user name and password is correct. Regardless of the user name or password any one error, you will encounter the problem of
After you have forgotten how to do this if you have a change in the router`s account or password? General router has reset function. Tp link, for example, in router back (there are many cable interface side), there is a marked “reset” the words of the holes, in electricity, with thin wire (or toothpick stiffer thin stick can be) extends to hold not to put, and unplug the power supply to the router. Then re energized, the connected network cable connected in the WLAN router port to your computer connected to the router LAN port, you can reset the router (router reset method is different, please refer to the instruction manual). After reset, and then connect to the, enter the initial user name and password, can not open the fault is generally lifted. The default account password, common password default value default value: admin admin, user name: admin Password: admin user name: admin Password: 123456, username: admin Password: 1234, user name: user password: password, user name: root password: root and username

Some of my friends do not know how to manage the router, do not know where to log in the router,in fact, the general home router is in the browser to log in management. Specific router landing address is which please refer to the following.

Generally we buy into the router product specification will be clearly marked landing address of the router, router login username and password etc.. Usually, landing address will generally marked on the back of the router, on some labels, above the record router order column number, at the same time also suggested that to your router landing address and username and password. In short, more than anything to see the manual.

If your router is not seen in the manual or the code on the router can also use the following login address to try to land, generally can solve the problem.

The vast majority of routers, including the number of wireless router landing address are:
Most wireless router login address is:
Can try more than 2 address when you encounter the router landing. Landing into is to enter the login screen, if not, please check the line and connection problems.

Conclusion: some network administrators for the security of the router, the general will change the router’s IP address, if you want to change the router’s IP address, please refer to the article:Teach you how to modify the router LAN address of the IP method.

Is it possible to enter in the website using “http″ , “” or “www.″.
First you should know that “http″ , “” or “www.″ is not any website address.

That is just address to connect with router which forms the hub of an area network and generally handles the web association additionally. Sadly although, it’s not yours or, goodbye the cable is connected kind the pc to the router, getting into that in your browser would take you there. So, you either are not wired up properly or it isn’t the proper address.

If you want to use wireless to connect to the router, you are not connected properly and it’s in all possibility as a result of you haven’t got as way as fixing the router’s security key. Use the knowledge during this link to our Sticky Post on this issue to seek out the correct address then use the cable that came with the router to attach there to.

Definition: is the default IP address for home broadband routers and access points are usually sold in some models other than the American.

Use to connect to the router:
If the router uses the address on the local network for, you can log on to the router’s console through the Web browser to point to

Some manufacturers using
This IP address is set to the default of some PHILPS, God’s brain and some other routers and access points to the manufacturer. However, any computer on a router or local network can be set to use (in order to avoid the address conflict, it is only on the network that a device should use it). is a private IPv4 network address, which means you can’t connect to the router, use the address from outside the home network. Instead, you must use the router’s public IP address.

I recently in the study of CCNA courses,for the study of the CCNA also specifically added a lot of CISCO Certification Group, in the group has just started a friend asked the author, and what is the difference? What is the connection between the two? To solve this problem, I think it is necessary to do a simple discussion, not to have a look at the understanding, after all, the ability to be limited. and is belonging to the class C IP address (IP to class C IP address range, the top three 8-bit bytes represent current network segment, after a specific number represents LAN in a computer), and the two address most of the time all assume a role of gateway, the egress router. Slightly some knowledge of network, friends all know that different segments between visits, must be a router or similar to the gateway device as an intermediary to communication, and and is to export gateway IP address.

Now on the market most brands of router uses the default management IP address or, such as all types of tp link router default gateway address for, and D-Link is, of course, we in the router configuration, modify the gateway address, but the factory this IP address had a brush into firmware to the.

When we set up the router, we often see the address format:
IP address:
Subnet mask:
Gateway (router):
Summary: in my opinion, the two address no what difference, are for use within the LAN (private) network, but is set for a different brand router default management address, this is the only.
There are more information of in

Router is our daily Internet access to an indispensable network equipment,but the Internet continues to play advertising? Do not kill the virus? Your router may be “black”! Just click on the link, QQ password, chat records, online banking passwords instantly sent to hackers! The reason is that many routers loopholes and back door! How to carry out the corresponding security settings?

First of all, we need to log into the router`s web management interface, here, I demo with TP-LINK router, router, the other interlinked) if we did not modify the router login IP, then for the router, landing address, well general default user name and password are admin.

1, the router management page for password changes, after landing router successfully, we choose “system management” settings, and then select the management control”. Enter the password to be set, must be more complex, and can not set up 123456 or so! After the success of the input Click Save, and then the router management page will automatically exit, and then enter the password later set the password to log in

2, modify the router management login IP, after the success of the re landing router, we choose the network parameters settings, and then select the LAN port settings”. And then we modify the default login IP, here, for example, I entered the:, we can according to the format to fill out the IP address, and then the subnet mask settings do not modify, and then click save. Then routers save settings and settings to take effect, generally speaking routers need to reboot and settings to take effect, then after we landed the management interface of the router, it is necessary to us to set the IP input, the original IP address of will cannot log into the router management interface, the realization of the network security settings.

3, must be on the WiFi encryption, we choose the “Wireless Settings” settings, and then choose wireless security settings”. Select WPA-PSK/WPA2-PSK encryption, enter a complex password below. (the shortest is 8 characters, the longest is 63 ASCII code characters or 16 64 hex characters) do not set 12345678 simple digital password!

4, do not easily reveal the password to others. After giving a password to a stranger should be immediately modified wifi.