Administrator user name and password to manage the router 192.168.1.1, the router security is very important.If you forget the administrator user name or password, please try to solve the following method.

TP-LINK wireless router has three types of log in, please confirm your router login mode and the corresponding solution method:

1, request to enter the administrator password
Log in to request an administrator password 192.168.1.1

The administrator password is the first time to log on to the router interface when the 6-15 password is set. If you forget the administrator password that was set at that time, reset the router and then reset the administrator password and log in.

2, requires the input user name and password
(1) if the user name and password has not been modified, please enter the admin, password admin login (the letter is lowercase).
(2) if you have modified the user name or password, but forget, please reset the router, the user name and password are entered in admin login (the letter is lowercase).

3, request input password
(1) if the login password has not been modified, please enter admin login (the letter is lowercase).
(2) if the login password has been modified but forget, please reset the router, enter the admin login (the letter is lowercase)

Router reset method
Wireless router reset button has two kinds: RESET buttons and RESET holes.But the reset method is the same. The following specific methods: reset router is energized, hold down the RESET key for 5 seconds or more, you can let go. (RESET hole to use clips spikes hold)

The Netgear company Netgear wireless router performance is superior, practical and aesthetically pleasing, in today’s demanding application and a home network, you will be able to find a coverage of the fits your needs products.

These wireless products in quality, ease of use, reliability and security aspects have good performance in many of our received wireless products. This article will introduce the network parts company’s wireless router settings.

First step WGR614v6 access network
– the most common use of a home or small office network at present is the ADSL access, which is connected directly to the Internet with a computer dial-up network:

– one of the four local area network ports to be connected to the WGR614v6
– use another cable to connect the WGR614v6’s Internet port (the port on the router) to the ADSLMODEM.
Second step computer network property configuration
In the configuration of the router, the first to use the computer to manage the router’s network configuration, the following WindowsXPHomeEditionServicePack2 as an example to illustrate the computer configuration process:

2.2. set the computer to “get IP address automatically” and “get the DNS server address automatically.””:
Third step log router
3.1. to ensure that the computer has been in accordance with the first step of the four LAN port by connecting to the router, the router.
3.2. to open the computer’s InternetExplorer or NetscapeNavigator and other browsers, in the browser’s address bar, enter the address bar
“Note” first set up the router must be in accordance with the above steps and later management of the router or change the configuration, only need to type 192.168.1.1 in IE browser. At this time, the router will be required to provide a user name and password. Login router user name: admin, password: password, are lower case
“Note” no matter what kind of access the your broadband, must first through the way to connect to the router, the corresponding set in the basic settings page, after the completion of the wireless transceiver can only, before using a wireless connection. Then the content will be introduced ADSL dial-up, fixed IP and dynamic IP three broadband access mode in the basic settings configuration.

Route long, often forget the password. Methods in addition to reset the default password, to share with you.

Reset method for TP-link wireless router:
TL-WR3xx/TL-WR5xx/TL-WR6xx reset method
TL-WR340G+/TL-WR541G+ (1.6) /TL-WR641G+ (1.6): in the state, hold down the RESET key for more than 5 seconds, the router will return to the factory default value. Default management address: 192.168.1.1, the default user password admin/admin;

Traditional reset method is: first turn off the power, then press the reset button, and then turn on the power, until the system lights flash three times and then release the reset button, the router will revert to the default values. Default management address: 192.168.1.1, the default user name password: admin/admin;

TL-WR7xxN/TL-WR841N/TL-WR941N reset method
TL-WR7xxN/TL-WR841N/TL-WR941N: add power state, hold down the RESET key for more than 5 seconds, the router will revert to the factory default value. Default management address: 192.168.1.1, the default user password admin/admin;

V1 TL-WR841N: first off the power, and then hold down the RESET key to open the power, wait for the system lights flash three times after the release of the RESET key, the router will be restored to the factory default value. Default management address: 192.168.1.1, the default user password admin/admin;
V2 TL-WR841N: add power state, 5 seconds in a row to press RESET key 3 times, the router will be restored to the factory default value. Default management address: 192.168.1.1, the default user password admin/admin;

Wireless AP reset method
TL-WA501G+ 2 reset method: add power state, hold down the RESET key for more than 5 seconds, the router will revert to the factory default value. Default management address: 192.168.1.254, the default user password admin/admin;

TL-WA501G+ 1 reset method: first off power, then hold down the RESET key, and then turn on the power for 3 seconds, SYSTEM lights after the first light, AP will be restored to the factory default. Default management address: 192.168.1.1, the default user name password: admin/admin;
TL-WA501G reset method: first off power, then hold down the RESET key, and then turn on the power for 3 seconds, SYSTEM lights after the first light, AP will be restored to the factory default value. Default management address: 192.168.1.1, the default user name password: admin/admin