Router login, Archer C9 comes with the next generation 11ac Wi-Fi standard, offering total data transfer speeds up to 1.9Gbps.

With 1.3Gbps over the clearer 5GHz frequency, and 600Mbps using two wireless chips to maximize performance over the 2.4GHz frequency your whole home will get excellent wireless coverage. The outstanding Gigabit Wi-Fi and Gigabit wired connections are ideal for bandwidth sensitive applications like streaming in HD and seamless online gaming. With Archer C9 you get a super-fast, high performance connected home.

How to manage the Archer C9 Router?
1. Set up the TCP/IP Protocol in Obtain an IP address automatically mode on your computer.
2. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. The default one is admin for both username and password. If you can not visit this website, you can try 192.168.0.1 or 192.168.1.1.
If you forget the password please reset the router to factory default by pressing the reset button/hole on the router.
Default router password list

Some reviews: I get signal with the 2.4 throughout my entire 4,000sqft property. In a couple directions, it must pass through 4 walls but I still got useable signal.

Set up is easy. I’ve tested several of TP-Links routers and from the first to the last, it has never taken me more than 5 minutes from opening the box, to the time I had my first device paired to its Wi-Fi. If you ever have a problem they offer great 24hr customer support. I tested this out a couple times too and fielded them some uncommon and technical questions; they always knew the answers right away or within seconds.

This router is truly great looking. It is white, sleek and has nice blue lights. It sits vertically, rather than horizontally like most routers. I actually find that the upright design improves the performance/coverage, since the antennas sit much higher. The 3 antennas can be pointed to any direction, but I found that keeping the left and right antennas at a 45-degree angle and the center antenna straight up, gave the best coverage and performance. I had many connected devices (including smart devices) and found no stability issues during my testing. The dual core CPU definitely makes a big difference in this case. A lot of similar routers don’t come with one! I had no issues with Wi-Fi coverage around my home, and even had great signal in my backyard.

Router login, Archer C2300 boosts the Wi-Fi Speed up to 1625Mbps on 5GHz and 600Mbps on 2.4GHz. It can perfectly handle your favorite activities like gaming online, watching 4K movies, or sharing large files.

How to manage the Archer C2300 Router?
1. Set up the TCP/IP Protocol in Obtain an IP address automatically mode on your computer.
2. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. The default one is admin for both username and password. If you can not visit this website, you can try 192.168.0.1 or 192.168.1.1.
If you forget the password please reset the router to factory default by pressing the reset button/hole on the router.
Default router password list

MU-MIMO lets the Archer C2300 talk to several devices at once, and Smart Connect automatically places each device on the best available Wi-Fi band. With both working together, everyone can hop online at the same time without having to wait, and each device can always get the best connection.

Some reviews: I’ve been using this router as my main network product for the past 3 weeks and it has performed great for the price point. The set up was a breeze and the router has a great number of advanced configuration features that allowed me to tweak it for my home network setup. I currently have 25+ IP devices on my network at any given time and this router did not show any sign of slow-downs. This router is compatible with the Tether app which makes hardware management a breeze as well.

Does Archer C2300 support NAT loop back/hairpin?
Yes, it supports NAT loop back.If you try to setup my security camera DVR to access inside and outside the network. You should use the Virtual Servers and forwarded port 11025 to 192.168.1.100.
Then, you can connect to the cameras when I am using a different outside network, such as my work, or when I am using cellular/mobile data.

Router login,The Archer C2600 uses 4-Stream technology to boost its Wi-Fi capability, allowing its 2.4GHz and 5GHz bands to reach industry-leading max speeds of 800Mbps and 1733Mbps respectively. With 2.53Gbps combined Wi-Fi speed, the router gives your home unmatched wireless performance.

How to manage the Archer C2600 Router?
1. Set up the TCP/IP Protocol in Obtain an IP address automatically mode on your computer.
2. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. The default one is admin for both username and password. If you can not visit this website, you can try 192.168.0.1 or 192.168.1.1.
If you forget the password please reset the router to factory default by pressing the reset button/hole on the router.
Default router password list

Some reviews: TP-Link products have never let me down and this one is no exception. Have had this for some time so this is NOT a new review (well over a year now) and it has been through a couple of firmware updates since I have owned. I have a high volume of devices connected to this router and all perform flawlessly and very stable.The concurrent use is not high but at any given moment I have a game console, 3 smartphones, Roku streaming my TV service, and a daughter streaming movies on a desktop computer without a hiccup. I will continue to stand by TP-Link. Well done folks.

Archer C2600 disconnects frequently on 5g?
How about your other phones, laptops? Are they also disconnecting? If only the windows 10 is disconnecting, you may need to check the driver of wireless adapter or other settings on windows 10.
If all other devices are working well on 5G, you can try change the Channel and Channel Width of the 5GHz on the router. But your other devices are working well, then I think still some issue on the wireless adapter on your laptop.

Router login, The Archer C3150 V2 boasts a powerful combination of advanced Broadcom® NitroQAM™ technology and 4-Stream technology, which boosts wireless speeds up by 25%. This provides the speed and elite performance that you need to support your most demanding online applications, including simultaneous 4K streaming and online gaming.

How to manage the Archer C3150 Router?
1. Set up the TCP/IP Protocol in Obtain an IP address automatically mode on your computer.
2. Visit http://tplinkwifi.net, and log in with the username and password you set for the router. The default one is admin for both username and password. If you can not visit this website, you can try 192.168.0.1 or 192.168.1.1.
If you forget the password please reset the router to factory default by pressing the reset button/hole on the router.
Default router password list

MU-MIMO has been fine-tuned for better performance, providing more than twice the throughput across multiple MU-MIMO devices. It lets the Archer C3150 V2 talk to several devices at once, while Smart Connect automatically places each device on the best available Wi-Fi band. With both working together, everyone can hop online at the same time without having to wait, and each device can always get the best connection.
Moreover, dynamic Smart Connect technology automatically selects the best available band for each device.
How to set up set up an IPv6 internet connection on the Archer C3150_V2?
1. Log in to the web-based interface of the router.
2. Go to Advanced > IPv6.
3. Select the Internet connection type provided by your ISP.
Tips: If you do not know what your Internet connection type is, contact your ISP or judge according to the already known information provided by your ISP
4. Fill in information as required by different connection types.
1 ) Static IP: Fill in blanks and click Save.
2 ) Dynamic IP: Click Advanced to have more configuration if your ISP requires. Click Save to save the settings.
3 ) PPPoE: Fill in the Username and Password. Click Advanced to have more configuration if your ISP requires. Click Save to save the settings.
4 ) 6to4 Tunnel: An IPv4 Internet connection type is a prerequisite for this connection type (go to Basic > Internet to check the IPv4 internet connection type.). Click Save to save the settings.
5. Configure the IPv6 LAN settings. Leave the settings as default, and click Save.
6. Click Status to check whether you succeed or not. The following figure is an example of a successful PPPoE configuration.

Router login, TP-Link Archer C5400 delivers combined Tri-Band Wi-Fi speeds to 5334Mbps, letting you dedicate an entire band to gaming without slowing down your network.

Smart Connect helps devices run even faster by assigning them to the best available channel to balance network demand.

How to log in TP-Link Archer C5400 router?
1. Set up the TCP/IP Protocol in Obtain an IP address automatically mode on your computer.
2. Vist http://192.168.0.1 or http://tplinkwifi.net, and log in with the username and password you’ve set for the router.The default username is admin, the default password is admin, too.
Notice: The Archer C5400 Router’s default IP is 192.168.0.1, not 192.168.1.1.
The Archer C5400 gets a performance boosts of up to 25%, thanks to NitroQAM™ (1024-QAM) and 4-Stream. These advanced technologies allow the router’s 2.4GHz band and both of its 5GHz bands to provide industry-leading speeds of up to 1000Mbps and 2167Mbps, respectively. With NitroQAM and 4-Stream, you can game at the highest settings without lagging.
Reviews:TP-Link Archer C5400 router. What a GREAT router. This replaces my old wireless router in a 2 story 3200 sq. ft. home office. The old router signal wouldn’t reach every room, had to install a repeater. The C5400 has a very powerful signal. I did several speed tests on iPhone and get 200 Mbps wifi, even in the furthest room. Major improvement. Router configuration is simple but I didn’t try anything advanced. Used an Ethernet cable for configuration and screens popped up quickly, no delays. Found later firmware on TP-Link website and installed that. Simple. Turned on the “Smart Connect” so that all 3 SSIDs look like one and it seems to work fine, no problems. It is a bit expensive is a really simple, fast, very powerful wireless router.

Router login, TP-Link Talon AD7200 Multi-Band Wi-Fi Router uses the latest, most powerful wireless technology to provide speeds of up to 4600Mbps on the groundbreaking 60GHz Wi-Fi band, completely revolutionizing your definition of fast.

How to log in TP-Link Talon AD7200 router?
1. Set up the TCP/IP Protocol in Obtain an IP address automatically mode on your computer.
2. Vist http://192.168.0.1 or http://tplinkwifi.net, and log in with the username and password you’ve set for the router.The default username is admin, the default password is admin, too.
Notice: The Talon AD7200 Router’s default IP is 192.168.0.1, not 192.168.1.1.

TP-Link Talon AD7200
1. Supports the 802.11ad standard, the latest breakthrough in wireless technology
2. 7200Mbps combined wireless speeds, including speeds of up to 800Mbps on the 2.4GHz band, 1733Mbps on the 5GHz band, and 4600Mbps on the new 60GHz band
3. Multi-Band Technology establishes three distinct networks that allow you to connect more devices while still enjoying peak performance
4. MU-MIMO serves multiple devices simultaneously, providing speeds that are up to 3X higher
5. 1.4GHz dual-core processor powers through multiple complex tasks at the same time
6. Eight external high-performance antennas maximize coverage and enhance stability
7. Beamforming Technology promotes stronger, more reliable wireless connections
From the top view of the product, the AD7200’s 8 antenna deployment, looks quite domineering.
802.11ad standard Talon AD7200, in addition to the 2.4GHz in the 802.11n band 800Mbps, 5GHz 802.11ac also has the highest 1733Mbps bandwidth. In the latest 802.11ad part, the 60GHz band is used, the bandwidth is as high as 4600Mbps, so that the total bandwidth can reach the AD7200 level, and the detailed hardware specifications are as follows.
Talon AD7200 has a fairly rich software interface, and allows users to quickly and easily set up wireless routers in addition to the basic fast install feature. More into the basic and advanced mode, the user in the function settings, you can choose their own patterns in accordance with the different conditions.

192.168.0.254 is the IP address of several wireless routers. For example: TL-WR700N.

TL-WR700N supports the newest 802.11n standard, and provides backward compatibility with older 802.11b/g standards as well. With wireless speed up to 150Mbps, high bandwidth-consuming applications such as video streaming, using VoIP, or online gaming.

How to log in 192.168.0.254 IP address?
TL-WR700N is small enough to put into your pocket and take on the road to share the Internet. When your hotel only offers a wired network connection, just plug the network cable into the TL-WR700N and enter the default password to enjoy the convenience of wireless networking in your hotel room. It is easy to log in 192.168.0.254.
step 1: Enter http://192.168.0.254
step 2: Type the username and password into the boxes of the login page, the default username and password both are admin, then press Enter.

What can be done with 192.168.0.254?
192.168.0.254 supports AP, Router, Bridge, Client, Repeater modes to enable various wireless applications, giving users a more dynamic and comprehensive wireless networking experience. Multiple operating modes also help you to extend wireless range, just plug it in within range of the primary wireless router and in a spot near those areas.
192.168.0.254 provides WPA/WPA2 encryptions, which effectively and efficiently protect the wireless network.

How to use your TP-Link router as a wireless AP-access point? A friend ask me for some TP-Link wireless router setting questions.

I have a main router Linksys where is connected my PC with cable, also in this router is connected the modem for Internet.
I have second wifi router TP-LINK TL-WR940N for serving wifi Internet, which is connected to Linksys with cable. This cable is connected in Internet port (WAN) of TP-LINK.
I want to access TP-LINK router from my pc.
The WAN IP of TP-link is like: 192.168.1.137
The LAN IP of tp-link is: 192.168.0.1
My pc is: 192.168.1.149
linksys : 192.168.1.1
I can not connect with: http://192.168.1.137
How to access tp-link from my pc?

Step 1
Connect your computer to a second LAN port on your TP-Link wireless router using an Ethernet cable.* Login to the TP-Link web interface through the IP address listed on the label on the bottom of your TP-Link wireless router.
Note: Though possible, it is not recommended to attempt this process over Wi-Fi

Step 2
Go to Network>LAN on the side menu and change the LAN IP address of your TP-Link wireless router to an IP address on the same segment of the main router. This IP address should be outside the main router’s DHCP range. if the DHCP of your main router is 192.168.2.100 – 192.168.2.199 then you can set the IP of the TP-Link N router to 192.168.2.11

Step 3
Go to Wireless>Wireless Settings and configure the SSID (Network name)which can be the same or different from the main router’s. Select Save.

Step 4
Go to Wireless>Wireless Security and configure the wireless security. WPA/WPA2-Personal is recommended as the most secure option. Once configured, click Save.keep wireless network security

Step 5
Go to DHCP>DHCP Settings and select Disable the DHCP Server.

Step 6
Go to System Tools>Reboot and select Reboot to reboot the device.forget router username or password

Step 7
Use an Ethernet cable to connect the main router to your TP-Link wireless router through their LAN ports (any LAN ports may be used). All other LAN ports on your TP-Link wireless router will now grant devices Internet access. Alternatively, any Wi-Fi device can now access the Internet through your TP-Link wireless router by using the SSID and Password set up in the above steps.

This list will help you to find the commonly used default router or modem username and passwords.Usually many modem or router brand, to access the administration panel uses 192.168.1.1 IP address. The second most popular is the IP address used 192.168.0.1

Default Router Passwords List

Modem Brand Login IP Username Password
3Com http://192.168.1.1 admin admin
Belkin http://192.168.2.1
BenQ http://192.168.1.1 admin admin
D-Link http://192.168.0.1 admin
TP-Link http://192.168.1.1 admin admin
Digicom http://192.168.1.254 admin michelangelo
Digicom http://192.168.1.254 user password
Digicom http://192.168.1.254 admin michelangelo
Linksys http://192.168.1.1 admin admin
Netgear http://192.168.0.1 admin password
Sitecom http://192.168.0.1 admin admin
Sitecom http://192.168.0.1 sitecom
Thomson http://192.168.1.254 user user
US Robotics http://192.168.1.1 admin admin

Note: If this table can not help you, you need to get back to the factory settings with the reset button on the router or modem

The ip address 192.168.O.1 allows users to get the whole accsess to their administration panels.

Most of the wireless router producing brands accustomed to it. This software is meant for simplifying users’ lives. Alter organizations and setup new settings whenever you want.

What is possible with 192.168.O.1?
Entering the 192.168.O.1 address, you will get a full approval on it. After getting to your administration panel,like 192.168.0.1 ,by getting to the router’s administration panel PROXY, DNS, system administration, WAN Protocol settings, LAN, WLAN (WiFi), Virtual steering, NAT virtual server.

How would I get ip address 192.168.O.1?
What you need to do is to get to the router’s administration panel, just type 192.168.O.1 into the searching panel of the browser. Enter the user name and password in the pop-up box.If you do not remember your user name or password, you can reset the router by pressing the back button.