192.168.0.254 is the IP address of several wireless routers. For example: TL-WR700N.

TL-WR700N supports the newest 802.11n standard, and provides backward compatibility with older 802.11b/g standards as well. With wireless speed up to 150Mbps, high bandwidth-consuming applications such as video streaming, using VoIP, or online gaming.

How to log in 192.168.0.254 IP address?
TL-WR700N is small enough to put into your pocket and take on the road to share the Internet. When your hotel only offers a wired network connection, just plug the network cable into the TL-WR700N and enter the default password to enjoy the convenience of wireless networking in your hotel room. It is easy to log in 192.168.0.254.
step 1: Enter http://192.168.0.254
step 2: Type the username and password into the boxes of the login page, the default username and password both are admin, then press Enter.

What can be done with 192.168.0.254?
192.168.0.254 supports AP, Router, Bridge, Client, Repeater modes to enable various wireless applications, giving users a more dynamic and comprehensive wireless networking experience. Multiple operating modes also help you to extend wireless range, just plug it in within range of the primary wireless router and in a spot near those areas.
192.168.0.254 provides WPA/WPA2 encryptions, which effectively and efficiently protect the wireless network.

How to use your TP-Link router as a wireless AP-access point? A friend ask me for some TP-Link wireless router setting questions.

I have a main router Linksys where is connected my PC with cable, also in this router is connected the modem for Internet.
I have second wifi router TP-LINK TL-WR940N for serving wifi Internet, which is connected to Linksys with cable. This cable is connected in Internet port (WAN) of TP-LINK.
I want to access TP-LINK router from my pc.
The WAN IP of TP-link is like: 192.168.1.137
The LAN IP of tp-link is: 192.168.0.1
My pc is: 192.168.1.149
linksys : 192.168.1.1
I can not connect with: http://192.168.1.137
How to access tp-link from my pc?

Step 1
Connect your computer to a second LAN port on your TP-Link wireless router using an Ethernet cable.* Login to the TP-Link web interface through the IP address listed on the label on the bottom of your TP-Link wireless router.
Note: Though possible, it is not recommended to attempt this process over Wi-Fi

Step 2
Go to Network>LAN on the side menu and change the LAN IP address of your TP-Link wireless router to an IP address on the same segment of the main router. This IP address should be outside the main router’s DHCP range. if the DHCP of your main router is 192.168.2.100 – 192.168.2.199 then you can set the IP of the TP-Link N router to 192.168.2.11

Step 3
Go to Wireless>Wireless Settings and configure the SSID (Network name)which can be the same or different from the main router’s. Select Save.

Step 4
Go to Wireless>Wireless Security and configure the wireless security. WPA/WPA2-Personal is recommended as the most secure option. Once configured, click Save.keep wireless network security

Step 5
Go to DHCP>DHCP Settings and select Disable the DHCP Server.

Step 6
Go to System Tools>Reboot and select Reboot to reboot the device.forget router username or password

Step 7
Use an Ethernet cable to connect the main router to your TP-Link wireless router through their LAN ports (any LAN ports may be used). All other LAN ports on your TP-Link wireless router will now grant devices Internet access. Alternatively, any Wi-Fi device can now access the Internet through your TP-Link wireless router by using the SSID and Password set up in the above steps.

192.168.1.1 Admin Wireless Security Settings is very important.Many users only pay attention to the transmission speed but ignore the security of wireless network.

According to the survey, 90% of the network intrusion is caused by the wireless router is not corresponding to the 192.168.1.1 security settings. Here are a few basic security settings that can help you stay away from most of the threats.

Disable DHCP features
Dynamic Host Configuration Protocol,General router DHCP is enabled by default, so that all wireless devices within the signal range can be automatically assigned to the IP address, which left a great security risk. An attacker can easily get a lot of information about your router by distributing the IP address, so disabling the DHCP feature is necessary.

Wireless encryption
General wireless AP or router has WEP encryption and WPA encryption, WEP includes both 64-bit and 128-bit encryption type, as long as enter 10 or 26 x 16 string as encrypted password can protect your wireless network.
WPA make networks more secure and reliable. Should be noted that wireless router wireless encryption is turned off when they go out, but if you give up this function, then your network is a network of severe insecurity, it is recommended that you set this feature is enabled.

Turn off SSID broadcasting
SSID is the name of your wireless network access. When searching for a wireless network, your network name will appear in the search results. Once an attacker to leverage common initialization string to connect to a wireless network, extremely vulnerable to your wireless network, so I strongly recommend that you turn off SSID broadcasting.

Set the IP filtering and MAC address list
Because each network card’s MAC address is unique, you can increase security by setting the MAC address list. After the IP address filtering feature is enabled, only IP addresses in the list of MAC users can access the wireless network, the other is not in the list can not be connected to the network.

The ip address 192.168.1.100 is the login address of some routers.Most of the router’s IP address is 192.168.1.1,this address 192.168.1.100 is used for security.

What you can do with the ip address 192.168.1.100?
Enter 192.168.1.100. IP address, you will get a full approval. When you go to the management panel, you can change the configuration of your router and the arrangement of the self.Subsequent options, security, network management, QoS IP, wireless LAN settings, LAN, Wan, agent, MAC, WPS, DSL, ADSL, select the changes you want to change. It gives you the possibility to command your network connection, wherever you are: in the wireless router area, in the work environment or in the school, home, cafe, etc..

How to access 192.168.1.100 IP address?
It’s easy to login to this IP address.Just enter 192.168.1.100 in the browser address bar.if you forgot your user name or password,the article Default router password list can help you ,or reset your router by press the reset button.

The ip address 10.0.0.1 is the management panel address of your router or modem. It gives you the possibility to command your web connection wherever you are: in the router’s area, in the work environment but also at school, home, café, etc.

What can be done with the IP address 10.0.0.1?
Entering the 10.0.0.1 ip address, you will get a full approval on it. After accessing your management panel you can change the settings and configurations that your router software provides.You can make following adjustments; Network Management, IP QoS, Security Options, Proxy, DNS, WLAN, LAN, WAN settings, DHCP client, DSL, WPS, MAC, ADSL blocking and the other adjustments.

How to enter 10.0.0.1 ip address?
It is easy to enter 10.0.0.1 ip address.Just enter http://10.0.0.1 to you browser.Also with the help of the input button on our site, you can easily access as well.what can you do if you forget your default password for 10.0.0.1 ? It is very simple,the artile Default router password list will help you.

This IP 192.168.l.2 is the address of your wireless router.Most of the wireless router producing brands accustomed to it. Most of the top router manufacturing companies add default private ip address which works your own IP address. You can change that ip address easily.

Which advantages gives this IP address 192.168.l.2 ?
Getting to 192.168.l.2 you need to log in as a completely authorized user. Gives you the opportunity to get to your gadget with full approval, making changes and playing on all exchanges that are offered to you.Security choices, system administration, Proxy, DNS, IP Qos, WAN, LAN, WLAN configurations,MAC, ADSL, DSL, WPS changes, for example, blocking, system administration.

How can I get the IP address 192.168.l.2 ?
There are much infomations in the internet,but much of the information for 192.168.l.2 is out of date and in some places inaccurate or misleading. In fact, 192.168.l.2 and 192.168.1.2 are the same.If you have a problem with remembering your router’s password or username, you can find the default from Default router password list,if you have changed it ,you need to reset your router.

This list will help you to find the commonly used default router or modem username and passwords.Usually many modem or router brand, to access the administration panel uses 192.168.1.1 IP address. The second most popular is the IP address used 192.168.0.1

Default Router Passwords List

Modem Brand Login IP Username Password
3Com http://192.168.1.1 admin admin
Belkin http://192.168.2.1
BenQ http://192.168.1.1 admin admin
D-Link http://192.168.0.1 admin
TP-Link http://192.168.1.1 admin admin
Digicom http://192.168.1.254 admin michelangelo
Digicom http://192.168.1.254 user password
Digicom http://192.168.1.254 admin michelangelo
Linksys http://192.168.1.1 admin admin
Netgear http://192.168.0.1 admin password
Sitecom http://192.168.0.1 admin admin
Sitecom http://192.168.0.1 sitecom
Thomson http://192.168.1.254 user user
US Robotics http://192.168.1.1 admin admin

Note: If this table can not help you, you need to get back to the factory settings with the reset button on the router or modem

The ip address 192.168.O.1 allows users to get the whole accsess to their administration panels.

Most of the wireless router producing brands accustomed to it. This software is meant for simplifying users’ lives. Alter organizations and setup new settings whenever you want.

What is possible with 192.168.O.1?
Entering the 192.168.O.1 address, you will get a full approval on it. After getting to your administration panel,like 192.168.0.1 ,by getting to the router’s administration panel PROXY, DNS, system administration, WAN Protocol settings, LAN, WLAN (WiFi), Virtual steering, NAT virtual server.

How would I get ip address 192.168.O.1?
What you need to do is to get to the router’s administration panel, just type 192.168.O.1 into the searching panel of the browser. Enter the user name and password in the pop-up box.If you do not remember your user name or password, you can reset the router by pressing the back button.

The ip address 192.168.0.1.1 is a wrong ip address,the right ip is 192.168.0.1.

When you want to manage your router,always type the address 192.168.1.1 or  192.168.0.1 into your browser.you will type wrong when you press fast,the last word 1 is redundant, it can be left out.

What should be possible with 192.168.0.1.1?
When logging in to the address 192.168.0.1.1, you get the access to the administration panel.Security choices, system administration: IP QoS, Security Options, Network Management, Proxy, Security Options, WAN settings DNS, LAN, WLAN, DHCP customer, MAC, WPS, DSL, ADSL blocking and alternate modification. And so, you everywhere can connect to your router.

What will you do  if you forgot your username or password?
You need to do reset factory settings of the router. Each device has a hidden reset button, which should be pressed by a needle or toothpick a for 10-20 seconds.

You use the wireless router and the panel management address, 192.168.1.254 is the IP address code.
Most of network companies in the production of the wireless router devices in a way that’s easy to administer the software installs.

This application and software on the Internet link provides access to the settings when the problems and these problems are solved.

What can be done from this ip 192.168.1.254?
When you enter the ip address of 192.168.1.254, electronic network, you provide access to your wireless router device. Wireless or wired modem Router without noticing that refer to the options and features of the software on the wireless router settings and repairs are made.

After you log in to the router software,security options, network management, security options, IP Qos, DNS, Proxy, LAN, WAN, WLAN settings, DSL, DHCP client, PPPOE, MAC, WPS and DSL to your ip address blocking and all other adjustments, you can accomplish this by logging..

How do I go to the address 192.168.1.254?
In order to achieve your wireless router’s user interface, you must enter the address http://192.168.1.254. You can copy this address into your browser, or to log in to our site that we share with the help, you can have direct access to the login button.

We share on our site for you by clicking on the login to your wireless router, you can easily access. Incorrect password or password during this process can be seen such as with the problem of forgetting. It is necessary to make a fully qualified a good match for your entry if you do not know your user name and password, our writing what you can do easily, you can get trains to get around later.