TP-Link TL-WR902AC router login review

TP-Link TL-WR902AC – AC750 router login review
It is a Wireless Travel Router, whether you need a private Wi-Fi network while away or something to boost your Wi-Fi at home, the TL-WR902AC has a mode for you.

Two modes on Travel

1. Router Mode
Plug the travel router in to your hotel room's Ethernet port to create a private Wi-Fi network for internet access without needing to compete with other guests.

2. Hotspot Mode
Connect to an outdoor WISP Access Point, enjoy a private Wi-Fi hotspot for your devices in public areas.

Three modes at home

1. Range Extender Mode
Extend your existing Wi-Fi network to maximize coverage and eliminate dead zones.

2. Client Mode
Allow devices that require a wired connection to access an existing Wi-Fi network.

3. Access Point Mode
Create a wireless network for Wi-Fi enabled devices.

How to manage the router TL-WR902AC – AC750?
1. Set up the TCP/IP Protocol in Obtain an IP address automatically mode on your computer.
2. Open a Web Browser -> Type http://192.168.0.254 in the address bar -> Press Ente, and log in with the username and password you set for the router. The default one is admin for both username and password. If you can not visit this IP, you can try 192.168.0.1 or 192.168.1.1.

If you forget the password please reset the router to factory default by pressing the reset button/hole on the router.
Default router password list

The travel router comes with a built-in USB 2.0 sharing port. Connect a USB storage drive to share access to files, download movies and back up recent photos. Connect your smartphone cable and the router doubles as a 5V/1A charging station for one device.

Some reviews: Bought this to set up in a hotel room with reportedly slow Wifi. Interested to see if I can create a local network in my hotel room using WISP to access my servers at home to watch my TV when I want to while using a Roku in a hotel which has become much easier but might be even better using this little gem.

How to Use the Ping Command

What is ping?
Ping is the abbreviation of “Packet Internet Groper”, it is a command which tests the connection between two network nodes by sending packets to a host and then reporting the time it takes to get a response.

The nodes can be in a Local Area Network, Wide Area Network or anywhere on the internet. And you can ping an IP Address (192.168.1.1) or Domain Name (www.192-168-1-1.co).

The format of ping command
Enter the word ping, followed by a space, then the domain name/ip address (then hit enter to see your ping output).
For example: ping 192.168.0.1, ping www.192-168-1-1.co

The result of ping command
If it shows a series of replies, the connection is working. The time shows you how fast the connection is. If you see a “timed out” error instead of a reply, there is a breakdown somewhere between your computer and the domain.

Use ping on Windows:
In Windows, select Start-> Programs-> Accessories-> Command Prompt. This will give you a window like the one below. Or click Start and go to Run, type “cmd” in the box and click OK.
1.Ping an IP address. ping 192.168.1.254
2.Ping a domain name. ping www.192-168-1-1.co
Success: Reply from 192.168.1.253: bytes=32 time<1ms TTL= 64 Error: Request timed out. Use ping on Mac:
Hard Drive -> Applications -> Utilities -> Terminal
Unlike Widnows, the Ping here doesn’t only Ping 4 times, but it keeps going down Ping. If you need to stop, press the control+c key on the keyboard to stop the Ping process.

Use ping on linux:
Open a telnet/TERMINAL window.
[[email protected] ~]# ping 192.168.0.254
PING 192.168.0.254 (192.168.0.254) 56(84) bytes of data.
Success: 64 bytes from 192.168.0.254: icmp_seq=1 ttl=64 time=0.720 ms
Error: From 192.168.0.254 icmp_seq=1 Destination Host Unreachable

Use ping on iPhone:
1. Go to the App Store on your iPhone and download the “Network Ping Lite” application. It is a free app as of this writing.

2. Open the application and you will see four choices: Ping, Ping Subnet Traceroute, and Telnet. For this article we’ll focus on the functions related to pinging.

3. Choose “Ping” to ping a specific device.

4. Enter the DNS name (google.com) or IP address of the specific device you would like to ping and hit “Start.” Your iPhone will now send out four ICMP packets and will tell you the outcome in the “Output” section. * Note: You can do a continuous ping by flipping the “Ping Forever” switch at the bottom.

5. Choose the “Ping Subnet” icon to ping an entire subnet.

6. By default, the app should pick up the subnet that your iPhone is already on. You can change it to check a different subnet or range of IP addresses. (Note: It can only check Class C network subnets.) You can adjust the “Ping Delay” which is the amount of time that the app will wait for a reply from the device before it declares it failed.

7. Hit “Start” and the scan will begin. You’ll see a table of all the possible Class C IP addresses for that subnet and the app will change the color of each as it scans to let you know which ones replied. Black = no reply. Green = Received reply. Yellow = last request failed. Red = stopped giving answer. The scan will take several minutes to complete, so be patient.

TP-Link Archer C59 router login review

TP-Link Archer C59 – AC1350 router login review
The Archer C59 comes with the brand new Wi-Fi standard — 802.11ac, widely compatible with both wireless AC and wireless N devices and three times faster than previous wireless N speeds.

With this cutting edge technology, the Archer C59 offers you faster, stronger and more capable Wi-Fi. Simply put: a revolutionized network experience on all your devices.

How to manage the Archer C59 – AC1350 Router?
1. Set up the TCP/IP Protocol in Obtain an IP address automatically mode on your computer.
2. Visit http://192.168.1.1, and log in with the username and password you set for the router. The default one is admin for both username and password. If you can not visit this website 192.168.1.1, you can try 192.168.0.1.
If you forget the password please reset the router to factory default by pressing the reset button/hole on the router.
Default router password list

The Archer C59 provides your entire home with simultaneous dual band Wi-Fi connections. The strong and stable 2.4GHz wireless band with 450Mbps Wi-Fi speed is perfect for sending emails, browsing the web or listening to music. Meanwhile, the 5GHz wireless band provides up to 867Mbps Wi-Fi speed for latency-sensitive entertainment so you can stream HD video, play online games and hold video chats all at the same time, without delay.

Some reviews: I’ve been using lots of various routers over the years, and I have to say, I love simple routers. This router is easy to set up, has lots of great features and most of all, it’s simple. I used this router to just extend my network even though there is no bridge mode.

This is a great router for any home. The dual band feature lets you have multiple devices connected and using WiFi at the same time. The setup process was very easy and simple. I had the route up and running within 5 minutes. The range is so good that I do not have any dead spots in my home and I get great speed everywhere.

The Archer C59’s three high performance external antennas ensure full home Wi-Fi coverage. Combined with a dual band wireless network, its increased stability and range means you will no longer suffer from weak, dropped connections.