192.168.10.1

The IP address 192.168.10.1 is the IP of the routers, such as: Netgear, Asus, TP-Link, Cisco, Linksys, and D-Link. 192.168.10.1 belongs to the IP address of the C class address, it is reserved IP, specifically for router settings.

What can be done with 192.168.10.1?

IP 192.168.10.1 is the management URL of the many routers. After you log in this IP address, you can change the router’s IP, change the wireless password, and other setting. So, it is a important IP address, just like 192.168.1.1 and 192.168.0.1.

How to log in 192.168.10.1?

Enter http://192.168.10.1 into your browser address bar. You should see login screen for the router administration inferface. If you see “Connection timeout”, “Connection error” or other error then most probably your router isn’t using 192.168.10.1 ip address as a default. Then enter default username and password, you will log in the router successful.

How to find the default username and password?

The default username and password are on the back of router. In the ordinary course of events, username is admin, password is admin or 123456. If you can not find them, click default router password list. Is there no result in the list? Rest router by holding the reset button for 15s.

set up router with mobile phone

In this article, I mainly give you a detailed description of how to use a mobile phone to set up a wireless router.

In fact, it’s the same to set up a router with a mobile phone or a computer. Also, I personally feel that it is more convenient to use a mobile phone to set up a router than to use a computer.

When you buy a new router, or a reset router, use a mobile phone to set up the Internet, please follow the following steps:
1. Connect the router correctly.
2. Connect the WiFi signal to the router with a mobile phone.
3. Set up a router with a mobile phone.
4. Check whether or not it is successful.

Connect the router correctly

1. The wire connected in the modem is inserted in the WAN port of the tplink router. If your home broadband does not use a modem, you need to plug the network line into the WAN port of the tplink router.
2. If you have a computer in your home, connect to any port in the router’s LAN (1\2\3\4) with a network line.
Connect the WiFi signal to the router with a mobile phone.
When you have connected the WAN port of the router , the phone needs to open the WLAN, and connect to the WiFi signal of this router.

Set up a router with a mobile phone

1. Find the management address of the router
At the bottom of the router, or in other places, there is usually a nameplate. In this nameplate, the router’s management address will be displayed. In the general router bottom nameplate, the information behind the options of “management page”, “login address”, “login IP” and “IP address” is the setting address of the router. The IP address is 192.168.1.1 or 192.168.0.1.
2. Log in the router
Take 192.168.1.1 as an example, how to log in router.