How to Turn Off Network Sharing on Windows

This article teaches you how to stop sharing files and Internet connections on Windows PC.

Disable network file sharing

  1. Press Win + S to open the Windows search bar. Using this method prevents other people on the network from accessing files on your computer.
  2. Type “control panel“. A list of results will appear. Then, click “control panel“.
  3. Click Network and Sharing Center.
  4. Click Change advanced sharing settings. It’s the third link from the top of the left column.
  5. Click the network profile that says “(current profile)” at the end.
  6. Select Turn off file and printer sharing.
  7. Click Save changes.

Disabling Internet Connection Sharing

  1. Press Win + S to open the Windows search bar. Using this method prevents other people on the network from accessing files on your computer.
  2. Type “control panel“. A list of results will appear. Then, click “control panel“.
  3. Click Network and Sharing Center.
  4. Click Change adapter settings. It is the second link on the top of the left column. This will open the list of saved network connections.
  5. Right click the current connection. Look for the name of the connection you have just seen. A pop-up menu will appear.
  6. Click Properties. You will see the connection property dialog window.
  7. Click the Sharing tab. It’s on the right of the networking.
  8. Remove the check mark from “Allow other network users to connect through this computer’s internet connection.” If the box is empty, there is no need to make any changes.
  9. Click OK. It is at the bottom of the dialog window. Now you have disabled network connection sharing, and no other person on the network can connect to Internet through this computer.

How to Secure Your Wireless Home Network

This article will show you how to set up a router to prevent unauthorized access to your wireless home network. You can do this by setting up the panel on the router. Keep in mind that the management panel of each brand’s router is different, which means that you’ll most likely need to find the changed settings.

Don’t tell people your network password

In doing so, you may not seem very friendly, but you can help them set up the wireless password. Don’t let them enter wireless passwords.

Put the router at home

In addition to making your router coverage more balanced, this will also restrict the router from exceeding the family’s scope. This means that potential network intruders will not be able to sit outside your home and still connect to the network.

Disconnect the router when you don’t use it

If you plan to leave your home for a weekend or longer, please unplug the router and modem. This is not only a security precaution, but also an active security measure that prevents any potential attacker from connecting to your Internet when you can’t stop it.

Use a boring network name

This may sound silly, but changing the smart Wi-Fi network name to a boring network name reduces its chances of being picked as a potential target. You can use the manufacturer and its number of the router (e.g., “Belkin-5030”) .

Disable the network sharing of the computer

You will often use network sharing at work, but it is best not to share your computer at home. It will make your computer a weak link in network security.

  1. Windows – Follow these instructions.
  2. Mac – Click the Apple menu Image titled Macapple1.png , click System Preferences…, click Sharing, and uncheck the “File Sharing” box.


Virtual Private Networks (VPNs) hide your network activity in the process by booting your network traffic through one or more exception servers. VPNs don’t necessarily protect your network because they hide it, but this is usually enough to prevent attacks and reduce the likelihood of future attacks.

Use the new technology router

Like any technology, routers will lose value in a few years, especially in the security sector. As network threats continue to update and develop, a new router will be better secure than a three or four-year router.

TP-Link Archer C9 router login review

Router login, Archer C9 comes with the next generation 11ac Wi-Fi standard, offering total data transfer speeds up to 1.9Gbps.

With 1.3Gbps over the clearer 5GHz frequency, and 600Mbps using two wireless chips to maximize performance over the 2.4GHz frequency your whole home will get excellent wireless coverage. The outstanding Gigabit Wi-Fi and Gigabit wired connections are ideal for bandwidth sensitive applications like streaming in HD and seamless online gaming. With Archer C9 you get a super-fast, high performance connected home.

How to manage the Archer C9 Router?
1. Set up the TCP/IP Protocol in Obtain an IP address automatically mode on your computer.
2. Visit, and log in with the username and password you set for the router. The default one is admin for both username and password. If you can not visit this website, you can try or
If you forget the password please reset the router to factory default by pressing the reset button/hole on the router.
Default router password list

Some reviews: I get signal with the 2.4 throughout my entire 4,000sqft property. In a couple directions, it must pass through 4 walls but I still got useable signal.

Set up is easy. I’ve tested several of TP-Links routers and from the first to the last, it has never taken me more than 5 minutes from opening the box, to the time I had my first device paired to its Wi-Fi. If you ever have a problem they offer great 24hr customer support. I tested this out a couple times too and fielded them some uncommon and technical questions; they always knew the answers right away or within seconds.

This router is truly great looking. It is white, sleek and has nice blue lights. It sits vertically, rather than horizontally like most routers. I actually find that the upright design improves the performance/coverage, since the antennas sit much higher. The 3 antennas can be pointed to any direction, but I found that keeping the left and right antennas at a 45-degree angle and the center antenna straight up, gave the best coverage and performance. I had many connected devices (including smart devices) and found no stability issues during my testing. The dual core CPU definitely makes a big difference in this case. A lot of similar routers don’t come with one! I had no issues with Wi-Fi coverage around my home, and even had great signal in my backyard. Admin Wireless Security Settings Admin Wireless Security Settings is very important.Many users only pay attention to the transmission speed but ignore the security of wireless network.

According to the survey, 90% of the network intrusion is caused by the wireless router is not corresponding to the security settings. Here are a few basic security settings that can help you stay away from most of the threats.

Disable DHCP features

Dynamic Host Configuration Protocol,General router DHCP is enabled by default, so that all wireless devices within the signal range can be automatically assigned to the IP address, which left a great security risk. An attacker can easily get a lot of information about your router by distributing the IP address, so disabling the DHCP feature is necessary.

Wireless encryption

General wireless AP or router has WEP encryption and WPA encryption, WEP includes both 64-bit and 128-bit encryption type, as long as enter 10 or 26 x 16 string as encrypted password can protect your wireless network.
WPA make networks more secure and reliable. Should be noted that wireless router wireless encryption is turned off when they go out, but if you give up this function, then your network is a network of severe insecurity, it is recommended that you set this feature is enabled.

Turn off SSID broadcasting

SSID is the name of your wireless network access. When searching for a wireless network, your network name will appear in the search results. Once an attacker to leverage common initialization string to connect to a wireless network, extremely vulnerable to your wireless network. so I strongly recommend that you turn off SSID broadcasting.

Set the IP filtering and MAC address list

Because each network card’s MAC address is unique, you can increase security by setting the MAC address list. After the IP address filtering feature is enabled, only IP addresses in the list of MAC users can access the wireless network, the other is not in the list can not be connected to the network.


192.168.l.l ip adress is the management panel address of your wireless router.

The worldwide producer firms of wireless router load updated software to it so that, it would be easily managed. With that software, the users can change necessary arrangements and configure new settings by reaching their management panel, whenever they come across to connection problems.

What can be done with
If you enter the IP address, It will prompt you to enter a user name and password. After accessing your management panel you can change the settings and configurations that your wireless router software provides. After accessing, you can change username and password along with default ip address from the admin control panel. From control panel change your default setting like username, password and ip address to ensure your wireless networking security. . In this way, not only in the location of your wireless router, in the workplace, at school, at home, cafes and wherever you are, you can manage your internet easily.

How to keep Wireless Network Security for the Home User?

Router is our daily Internet access to an indispensable network equipment,but the Internet continues to play advertising? Do not kill the virus? Your router may be “black”! Just click on the link, QQ password, chat records, online banking passwords instantly sent to hackers! The reason is that many routers loopholes and back door!

How to carry out the corresponding security settings?

First of all, we need to log into the router`s web management interface, here, I demo with TP-LINK router, router, the other interlinked) if we did not modify the router login IP, then for the router, landing address, well general default user name and password are admin.

1, the router management page for password changes, after landing router successfully, we choose “system management” settings, and then select the management control”. Enter the password to be set, must be more complex, and can not set up 123456 or so! After the success of the input Click Save, and then the router management page will automatically exit, and then enter the password later set the password to log in

2, modify the router management login IP, after the success of the re landing router, we choose the network parameters settings, and then select the LAN port settings”. And then we modify the default login IP, here, for example, I entered the:, we can according to the format to fill out the IP address, and then the subnet mask settings do not modify, and then click save. Then routers save settings and settings to take effect, generally speaking routers need to reboot and settings to take effect, then after we landed the management interface of the router, it is necessary to us to set the IP input, the original IP address of will cannot log into the router management interface, the realization of the network security settings.

3, must be on the WiFi encryption, we choose the “Wireless Settings” settings, and then choose wireless security settings”. Select WPA-PSK/WPA2-PSK encryption, enter a complex password below. (the shortest is 8 characters, the longest is 63 ASCII code characters or 16 64 hex characters) do not set 12345678 simple digital password!

4, do not easily reveal the password to others. After giving a password to a stranger should be immediately modified wifi.