192.168.0.254 is the IP address of several wireless routers. For example: TL-WR700N.

TL-WR700N supports the newest 802.11n standard, and provides backward compatibility with older 802.11b/g standards as well. With wireless speed up to 150Mbps, high bandwidth-consuming applications such as video streaming, using VoIP, or online gaming.

How to log in 192.168.0.254 IP address?
TL-WR700N is small enough to put into your pocket and take on the road to share the Internet. When your hotel only offers a wired network connection, just plug the network cable into the TL-WR700N and enter the default password to enjoy the convenience of wireless networking in your hotel room. It is easy to log in 192.168.0.254.
step 1: Enter http://192.168.0.254
step 2: Type the username and password into the boxes of the login page, the default username and password both are admin, then press Enter.

What can be done with 192.168.0.254?
192.168.0.254 supports AP, Router, Bridge, Client, Repeater modes to enable various wireless applications, giving users a more dynamic and comprehensive wireless networking experience. Multiple operating modes also help you to extend wireless range, just plug it in within range of the primary wireless router and in a spot near those areas.
192.168.0.254 provides WPA/WPA2 encryptions, which effectively and efficiently protect the wireless network.

How to use your TP-Link router as a wireless AP-access point? A friend ask me for some TP-Link wireless router setting questions.

I have a main router Linksys where is connected my PC with cable, also in this router is connected the modem for Internet.
I have second wifi router TP-LINK TL-WR940N for serving wifi Internet, which is connected to Linksys with cable. This cable is connected in Internet port (WAN) of TP-LINK.
I want to access TP-LINK router from my pc.
The WAN IP of TP-link is like: 192.168.1.137
The LAN IP of tp-link is: 192.168.0.1
My pc is: 192.168.1.149
linksys : 192.168.1.1
I can not connect with: http://192.168.1.137
How to access tp-link from my pc?

Step 1
Connect your computer to a second LAN port on your TP-Link wireless router using an Ethernet cable.* Login to the TP-Link web interface through the IP address listed on the label on the bottom of your TP-Link wireless router.
Note: Though possible, it is not recommended to attempt this process over Wi-Fi

Step 2
Go to Network>LAN on the side menu and change the LAN IP address of your TP-Link wireless router to an IP address on the same segment of the main router. This IP address should be outside the main router’s DHCP range. if the DHCP of your main router is 192.168.2.100 – 192.168.2.199 then you can set the IP of the TP-Link N router to 192.168.2.11

Step 3
Go to Wireless>Wireless Settings and configure the SSID (Network name)which can be the same or different from the main router’s. Select Save.

Step 4
Go to Wireless>Wireless Security and configure the wireless security. WPA/WPA2-Personal is recommended as the most secure option. Once configured, click Save.keep wireless network security

Step 5
Go to DHCP>DHCP Settings and select Disable the DHCP Server.

Step 6
Go to System Tools>Reboot and select Reboot to reboot the device.forget router username or password

Step 7
Use an Ethernet cable to connect the main router to your TP-Link wireless router through their LAN ports (any LAN ports may be used). All other LAN ports on your TP-Link wireless router will now grant devices Internet access. Alternatively, any Wi-Fi device can now access the Internet through your TP-Link wireless router by using the SSID and Password set up in the above steps.

This list will help you to find the commonly used default router or modem username and passwords.Usually many modem or router brand, to access the administration panel uses 192.168.1.1 IP address. The second most popular is the IP address used 192.168.0.1

Default Router Passwords List

Modem Brand Login IP Username Password
3Com http://192.168.1.1 admin admin
Belkin http://192.168.2.1
BenQ http://192.168.1.1 admin admin
D-Link http://192.168.0.1 admin
TP-Link http://192.168.1.1 admin admin
Digicom http://192.168.1.254 admin michelangelo
Digicom http://192.168.1.254 user password
Digicom http://192.168.1.254 admin michelangelo
Linksys http://192.168.1.1 admin admin
Netgear http://192.168.0.1 admin password
Sitecom http://192.168.0.1 admin admin
Sitecom http://192.168.0.1 sitecom
Thomson http://192.168.1.254 user user
US Robotics http://192.168.1.1 admin admin

Note: If this table can not help you, you need to get back to the factory settings with the reset button on the router or modem

The ip address 192.168.O.1 allows users to get the whole accsess to their administration panels.

Most of the wireless router producing brands accustomed to it. This software is meant for simplifying users’ lives. Alter organizations and setup new settings whenever you want.

What is possible with 192.168.O.1?
Entering the 192.168.O.1 address, you will get a full approval on it. After getting to your administration panel,like 192.168.0.1 ,by getting to the router’s administration panel PROXY, DNS, system administration, WAN Protocol settings, LAN, WLAN (WiFi), Virtual steering, NAT virtual server.

How would I get ip address 192.168.O.1?
What you need to do is to get to the router’s administration panel, just type 192.168.O.1 into the searching panel of the browser. Enter the user name and password in the pop-up box.If you do not remember your user name or password, you can reset the router by pressing the back button.

IP address 192.168.0.1 is the management ip address of some wireless router,it is the default ip address for all kinds of TP-link,D-Link and Netgear models. But you can change it at any time using the network router’s management console.

192.168.0.1 is a private IPv4 network address. Home routers can use it to create a default gateway. In such a router, you can access it to the management console, pointing to the http://192.168.0.1 through the Web browser.

Any brand of router, or any computer on the local network for this problem, you can use this address or similar private IPv4 address. Any IP address, only one device on the network uses 192.168.0.1 to avoid address conflicts.

What to do if you forgot your router’s username and password?

If you didn’t change your username and password, you can login to your router by checking our default router username and password list here.

more about 192.168.1.1, please visit this site, click

Now the vast majority of brand or brands wired or wireless router, the LAN port address general use 192.168.1.1 or 192.168.0.1 segment.

Using the default address, neither safe, sometimes it’s not practical, such as LAN computer number is too high, more than 255 sets, the class C address is not suitable for, then we need to the LAN port of the router address modification for other private network address, below the author on this issue, teach you how to modify the IP address of the router LAN port.

1, the computer IP address set for automatic acquisition.
2, open the IE browser, in the address bar to enter 192.168.1.1 or 192.168.0.1, the user name and password in the pop-up box and enter the default value, that is, admin/admin.
3, enter the router settings interface, click on the left menu bar network parameters LAN port settings.
4, on the right side of the LAN interface, the IP address to the desired address segment, such as 172.16.1.1, subnet mask 255.255.0.0
5, after the completion of the modification, click save, and generally this time the router is prompted to restart, click Yes.
6, the above five steps just for the router settings, if at this time want to log in to the router web interface, use 192.168.1.1 is can not be landed. Instead, we should use the local computer’s IP address section is arranged for 172.16.1.1 before they can.

Some of my friends do not know how to manage the router, do not know where to log in the router,in fact, the general home router is in the browser to log in management. Specific router landing address is which please refer to the following.

Generally we buy into the router product specification will be clearly marked landing address of the router, router login username and password etc.. Usually, landing address will generally marked on the back of the router, on some labels, above the record router order column number, at the same time also suggested that to your router landing address and username and password. In short, more than anything to see the manual.

If your router is not seen in the manual or the code on the router can also use the following login address to try to land, generally can solve the problem.

The vast majority of routers, including the number of wireless router landing address are: http://192.168.1.1
Most wireless router login address is: http://192.168.0.1
Can try more than 2 address when you encounter the router landing. Landing into is to enter the login screen, if not, please check the line and connection problems.

Conclusion: some network administrators for the security of the router, the general will change the router’s IP address, if you want to change the router’s IP address, please refer to the article:Teach you how to modify the router LAN address of the IP method.

I recently in the study of CCNA courses,for the study of the CCNA also specifically added a lot of CISCO Certification Group, in the group has just started a friend asked the author, 192.168.0.1 and 192.168.1.1 what is the difference? What is the connection between the two? To solve this problem, I think it is necessary to do a simple discussion, not to have a look at the understanding, after all, the ability to be limited.

192.168.1.1 and 192.168.0.1 is belonging to the class C IP address (IP to 233.255.255.254 class C IP address range, the top three 8-bit bytes represent current network segment, after a specific number represents LAN in a computer), and the two address most of the time all assume a role of gateway, the egress router. Slightly some knowledge of network, friends all know that different segments between visits, must be a router or similar to the gateway device as an intermediary to communication, and 192.168.1.1 and 192.168.0.1 is to export gateway IP address.

Now on the market most brands of router uses the default management IP address 192.168.1.1 or 192.168.0.1, such as all types of tp link router default gateway address for 192.168.1.1, and D-Link is 192.168.0.1, of course, we in the router configuration, modify the gateway address, but the factory this IP address had a brush into firmware to the.

When we set up the router, we often see the address format:
IP address: 192.168.1.2~192.168.1.254/192.168.0.1~192.168.0.254
Subnet mask: 255.255.255.0
Gateway (router): 192.168.1.1/192.168.0.1
Summary: in my opinion, the two address no what difference, are for use within the LAN (private) network, but is set for a different brand router default management address, this is the only.
There are more information of 192.168.0.1 in 192.168.0.1