192.168.0.254 is the IP address of several wireless routers. For example: TL-WR700N.

TL-WR700N supports the newest 802.11n standard, and provides backward compatibility with older 802.11b/g standards as well. With wireless speed up to 150Mbps, high bandwidth-consuming applications such as video streaming, using VoIP, or online gaming.

How to log in 192.168.0.254 IP address?
TL-WR700N is small enough to put into your pocket and take on the road to share the Internet. When your hotel only offers a wired network connection, just plug the network cable into the TL-WR700N and enter the default password to enjoy the convenience of wireless networking in your hotel room. It is easy to log in 192.168.0.254.
step 1: Enter http://192.168.0.254
step 2: Type the username and password into the boxes of the login page, the default username and password both are admin, then press Enter.

What can be done with 192.168.0.254?
192.168.0.254 supports AP, Router, Bridge, Client, Repeater modes to enable various wireless applications, giving users a more dynamic and comprehensive wireless networking experience. Multiple operating modes also help you to extend wireless range, just plug it in within range of the primary wireless router and in a spot near those areas.
192.168.0.254 provides WPA/WPA2 encryptions, which effectively and efficiently protect the wireless network.

How to use your TP-Link router as a wireless AP-access point? A friend ask me for some TP-Link wireless router setting questions.

I have a main router Linksys where is connected my PC with cable, also in this router is connected the modem for Internet.
I have second wifi router TP-LINK TL-WR940N for serving wifi Internet, which is connected to Linksys with cable. This cable is connected in Internet port (WAN) of TP-LINK.
I want to access TP-LINK router from my pc.
The WAN IP of TP-link is like: 192.168.1.137
The LAN IP of tp-link is: 192.168.0.1
My pc is: 192.168.1.149
linksys : 192.168.1.1
I can not connect with: http://192.168.1.137
How to access tp-link from my pc?

Step 1
Connect your computer to a second LAN port on your TP-Link wireless router using an Ethernet cable.* Login to the TP-Link web interface through the IP address listed on the label on the bottom of your TP-Link wireless router.
Note: Though possible, it is not recommended to attempt this process over Wi-Fi

Step 2
Go to Network>LAN on the side menu and change the LAN IP address of your TP-Link wireless router to an IP address on the same segment of the main router. This IP address should be outside the main router’s DHCP range. if the DHCP of your main router is 192.168.2.100 – 192.168.2.199 then you can set the IP of the TP-Link N router to 192.168.2.11

Step 3
Go to Wireless>Wireless Settings and configure the SSID (Network name)which can be the same or different from the main router’s. Select Save.

Step 4
Go to Wireless>Wireless Security and configure the wireless security. WPA/WPA2-Personal is recommended as the most secure option. Once configured, click Save.keep wireless network security

Step 5
Go to DHCP>DHCP Settings and select Disable the DHCP Server.

Step 6
Go to System Tools>Reboot and select Reboot to reboot the device.forget router username or password

Step 7
Use an Ethernet cable to connect the main router to your TP-Link wireless router through their LAN ports (any LAN ports may be used). All other LAN ports on your TP-Link wireless router will now grant devices Internet access. Alternatively, any Wi-Fi device can now access the Internet through your TP-Link wireless router by using the SSID and Password set up in the above steps.

IP address 192.168.0.1 is the management ip address of some wireless router,it is the default ip address for all kinds of TP-link,D-Link and Netgear models. But you can change it at any time using the network router’s management console.

192.168.0.1 is a private IPv4 network address. Home routers can use it to create a default gateway. In such a router, you can access it to the management console, pointing to the http://192.168.0.1 through the Web browser.

Any brand of router, or any computer on the local network for this problem, you can use this address or similar private IPv4 address. Any IP address, only one device on the network uses 192.168.0.1 to avoid address conflicts.

What to do if you forgot your router’s username and password?

If you didn’t change your username and password, you can login to your router by checking our default router username and password list here.

more about 192.168.1.1, please visit this site, click

Route long, often forget the password. Methods in addition to reset the default password, to share with you.

Reset method for TP-link wireless router:
TL-WR3xx/TL-WR5xx/TL-WR6xx reset method
TL-WR340G+/TL-WR541G+ (1.6) /TL-WR641G+ (1.6): in the state, hold down the RESET key for more than 5 seconds, the router will return to the factory default value. Default management address: 192.168.1.1, the default user password admin/admin;

Traditional reset method is: first turn off the power, then press the reset button, and then turn on the power, until the system lights flash three times and then release the reset button, the router will revert to the default values. Default management address: 192.168.1.1, the default user name password: admin/admin;

TL-WR7xxN/TL-WR841N/TL-WR941N reset method
TL-WR7xxN/TL-WR841N/TL-WR941N: add power state, hold down the RESET key for more than 5 seconds, the router will revert to the factory default value. Default management address: 192.168.1.1, the default user password admin/admin;

V1 TL-WR841N: first off the power, and then hold down the RESET key to open the power, wait for the system lights flash three times after the release of the RESET key, the router will be restored to the factory default value. Default management address: 192.168.1.1, the default user password admin/admin;
V2 TL-WR841N: add power state, 5 seconds in a row to press RESET key 3 times, the router will be restored to the factory default value. Default management address: 192.168.1.1, the default user password admin/admin;

Wireless AP reset method
TL-WA501G+ 2 reset method: add power state, hold down the RESET key for more than 5 seconds, the router will revert to the factory default value. Default management address: 192.168.1.254, the default user password admin/admin;

TL-WA501G+ 1 reset method: first off power, then hold down the RESET key, and then turn on the power for 3 seconds, SYSTEM lights after the first light, AP will be restored to the factory default. Default management address: 192.168.1.1, the default user name password: admin/admin;
TL-WA501G reset method: first off power, then hold down the RESET key, and then turn on the power for 3 seconds, SYSTEM lights after the first light, AP will be restored to the factory default value. Default management address: 192.168.1.1, the default user name password: admin/admin